Hydraulic-Cylinder Linkages
Use the published HCR10C dimensions and mounting geometry to review cylinder-side linkage fit.
Size 60 / 135 mm outer diameter / 167.5 mm lengthROD END / HEIM JOINT
HCR10C-60 Hydraulik-Gelenkkopf, Größe 60 mm
Part No.: HCR10C-60
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 60 mm
Inner ring width 44 mm
Diameter 6 mm
Dynamic load 245 kN
Static load 390 kN
Tilt angle 6°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Überblick
Hydraulik-Gelenkkopf HCR10C — Produktübersicht
Das HCR10C-60 ist ein metrisches Hydraulik-Gelenkkopflager für größere Gestängebaugruppen auf der Zylinderseite. Es kombiniert ein geschmiedetes Gehäuse aus St 52-3 mit einer Lagerschale und einem Innenring aus 100Cr6 / AISI 52100-Wälzlagerstahl, vergütet und geschliffen; Oberflächenbehandlung mit Phosphatierung und Molybdändisulfid.
Die Größen-60-Ausführung hat einen Außendurchmesser von 135 mm, eine Innenringbreite von 44 mm, eine Lagerbreite von 38 mm, eine mittlere Länge von 100 mm, einen Durchmesser von 6 mm, eine Gesamtlänge von 167.5 mm und eine Länge L4 von 1 mm. Die veröffentlichten Leistungswerte sind 43-120 μm Innenluftspiel, 245 kN dynamische Tragzahl, 390 kN statische Tragzahl, 70 mm Bunddurchmesser, 6° Kippwinkel und ein Gewicht von ca. 4600 g.
Hydraulik-Schmiernippel nach DIN 71412. Der angegebene Betriebsbereich liegt bei -50°C bis +150°C. Bestätigen Sie Zylindergeometrie, Querlastbedingung, Spiel, Schmierungszugang und die endgültigen Werkstoffanforderungen vor der Produktionsfreigabe anhand der Spezifikation HCR10C.
Größentabelle
Hydraulik-Gelenkkopf HCR10C — Vollständiges Größenspektrum
All available sizes in the Hydraulik-Gelenkkopf HCR10C series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [J] Diameter (mm) | [L] Length (mm) | [L1] Length (mm) | Internal clearance (μm) | Dynamic load rating (kN) | Static load rating (kN) | [K] Collar diameter (mm) | Tilt angle (°) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR10C-10 | 10 | 29 | 9 | 7 | 24 | 3 | 38.5 | 1.5 | 23-68 | 8.15 | 15.6 | 15 | 12 | 40 |
| HCR10C-12 | 12 | 34 | 10 | 8 | 27 | 3 | 44 | 1.5 | 23-68 | 10.8 | 21.6 | 17.5 | 11 | 60 |
| HCR10C-15 | 15 | 40 | 12 | 10 | 31 | 4 | 51 | 2 | 30-82 | 17 | 32 | 21 | 8 | 120 |
| HCR10C-16 | 16 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-17 | 17 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-20 | 20 | 53 | 16 | 13 | 38 | 4 | 64.5 | 2 | 30-82 | 30 | 54 | 27.5 | 9 | 260 |
| HCR10C-25 | 25 | 64 | 20 | 17 | 45 | 4 | 77 | 3 | 37-100 | 48 | 72 | 33.5 | 7 | 450 |
| HCR10C-30 | 30 | 73 | 22 | 19 | 51 | 4 | 87.5 | 3 | 37-100 | 62 | 95 | 40 | 6 | 670 |
| HCR10C-35 | 35 | 82 | 25 | 21 | 61 | 4 | 102 | 3 | 37-100 | 80 | 125 | 47 | 6 | 1020 |
| HCR10C-40 | 40 | 92 | 28 | 23 | 69 | 4 | 115 | 4 | 43-120 | 100 | 156 | 52 | 7 | 1400 |
| HCR10C-45 | 45 | 102 | 32 | 27 | 77 | 6 | 128 | 4 | 43-120 | 127 | 208 | 58 | 7 | 1930 |
| HCR10C-50 | 50 | 112 | 35 | 30 | 88 | 6 | 144 | 4 | 43-120 | 156 | 250 | 62 | 6 | 2690 |
| HCR10C-60 | 60 | 135 | 44 | 38 | 100 | 6 | 167.5 | 4 | 43-120 | 245 | 390 | 70 | 6 | 4600 |
| HCR10C-70 | 70 | 160 | 49 | 42 | 115 | 6 | 195 | 5 | 55-142 | 315 | 510 | 80 | 6 | 7000 |
| HCR10C-80 | 80 | 180 | 55 | 47 | 141 | 6 | 231 | 5 | 55-142 | 400 | 620 | 95 | 6 | 11000 |
Qualitätskontrolle
Jede Einheit wird vor dem Versand geprüft
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulik-Gelenkkopf HCR10C Rod Ends Are Used
Verwandte Produkte
All Products →Mehr aus der Serie Hydraulik-Gelenkkopf HCR10C Series
Angebot anfordern
Angebot für die Serie Hydraulik-Gelenkkopf HCR10C anfordern
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulik-Gelenkkopf HCR10C Häufige Fragen zu
What is the HCR10C series?
HCR10C is a metric hydraulic-cylinder rod end bearing series with published dimensional, clearance, load and ordering data.
Which HCR10C sizes are published?
The published HCR10C specification table contains 15 sizes in the listed range.
What material is used for HCR10C?
Housing: forged St 52-3 steel. Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, with phosphate and molybdenum-disulfide surface treatment.
How is HCR10C lubricated?
Sizes 10–12 have no lubrication fitting; sizes 15–20 use a grease hole; sizes 25–80 use a DIN 71412 hydraulic grease nipple.
What temperature range is listed for HCR10C?
The HCR10C page lists an operating range of -50°C to +150°C under the stated material and lubrication configuration.
What should I provide for a HCR10C quotation?
Provide the required size, cylinder-side mounting geometry or drawing, duty-cycle information and any lubrication or material requirements.