Suche nach Teilenummer, Serie, Material, Anwendung oder Spezifikation.
Enter drücken, um alle Ergebnisse anzuzeigen Esc zum Schließen
B 1.0000 / D 2.0000Die HCOM16(T) ist ein schweres Gelenklager der HCOM-Baureihe, mit 1.0000″ Bohrung (B) und 2.0000″ Außendurchmesser (D). Körperbreite (W) = 1.000″, Innenlaufbahnbreite (T) = 0.781″. Kugeldurchmesser = 1.687″. Flacher Außendurchmesser (O) = 1.360″. Gewicht ca. 0.553 lb.
Nennwert 70,820 lb statische Radiallast mit ±9.0° Fehlausrichtungswinkel. Die Kugel aus 52100-Wälzlagerstahl ist präzisionsgeschliffen, vergütet und hartverchromt. Die Laufbahn aus Vergütungsstahl ist geölt sowie gebohrt und genutet für externe Schmierung. PTFE-Auskleidung verfügbar — Suffix ‚T‘ hinzufügen (z. B. HCOM16T) für die PTFE-ausgekleidete, selbstschmierende Variante. Verwendet in Industriemaschinen, Landmaschinen, Hydraulikzylindern und tragenden Drehgelenkanwendungen mit hoher statischer Tragfähigkeit.
PTFE-ausgekleidete Variante verfügbar (Suffix ‚T‘). Laufbahn-Optionen in Chromoly (FKS-Baureihe) und Edelstahl (COM-SS-Baureihe) verfügbar. Verzinkte Laufbahn-Option auf Anfrage. Das metrische Äquivalent ist die COMA-M-Baureihe.
All available sizes in the COM(-T) Metal-to-Metal Spherical Bearings series. Can’t find your size? Contact us for custom dimensions.
| INCH PART NO. | B DIA. +.0015 -.0005 | D DIA. +.0000 -.0005 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | O FLAT DIA. REF. | M CHAMFER REF. | BALL DIA. REF. | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|
| COM2(T) | 0.1650 | 0.4687 | 0.250 | 0.187 | 0.235 | 0.020 | 0.343 | 9.0 | 3,200 | 0.010 |
| COM3(T) | 0.1900 | 0.5625 | 0.281 | 0.218 | 0.293 | 0.015 | 0.406 | 11.0 | 3,250 | 0.014 |
| COM4(T) | 0.2500 | 0.6562 | 0.343 | 0.250 | 0.364 | 0.022 | 0.500 | 13.5 | 4,950 | 0.022 |
| COM5(T) | 0.3125 | 0.7500 | 0.375 | 0.281 | 0.419 | 0.032 | 0.562 | 12.0 | 6,475 | 0.030 |
| COM6(T) | 0.3750 | 0.8125 | 0.406 | 0.312 | 0.516 | 0.032 | 0.656 | 10.0 | 8,400 | 0.038 |
| COM7(T) | 0.4375 | 0.9062 | 0.437 | 0.343 | 0.530 | 0.032 | 0.687 | 8.0 | 9,453 | 0.047 |
| COM8(T) | 0.5000 | 1.0000 | 0.500 | 0.390 | 0.640 | 0.032 | 0.781 | 9.5 | 13,250 | 0.065 |
| COM9(T) | 0.5625 | 1.0937 | 0.562 | 0.437 | 0.710 | 0.032 | 0.875 | 9.5 | 16,630 | 0.086 |
| COM10(T) | 0.6250 | 1.1875 | 0.625 | 0.500 | 0.780 | 0.032 | 0.968 | 8.5 | 21,280 | 0.110 |
| COM12(T) | 0.7500 | 1.4375 | 0.750 | 0.593 | 0.920 | 0.044 | 1.187 | 9.0 | 31,920 | 0.204 |
| COM14(T) | 0.8750 | 1.5625 | 0.875 | 0.703 | 0.980 | 0.044 | 1.312 | 9.5 | 41,960 | 0.263 |
| COM16(T) | 1.0000 | 1.7500 | 1.000 | 0.797 | 1.118 | 0.044 | 1.500 | 10.0 | 55,200 | 0.386 |
| HCOM16(T) | 1.0000 | 2.0000 | 1.000 | 0.781 | 1.360 | 0.032 | 1.687 | 9.0 | 70,820 | 0.553 |
| HCOM19(T) | 1.1875 | 2.3750 | 1.187 | 0.937 | 1.610 | 0.032 | 2.000 | 8.5 | 100,730 | 0.895 |
| HCOM20(T) | 1.2500 | 2.3750 | 1.187 | 0.937 | 1.610 | 0.032 | 2.000 | 8.5 | 100,730 | 0.895 |
| HCOM24(T) | 1.5000 | 2.7500 | 1.375 | 1.094 | 1.860 | 0.032 | 2.312 | 8.5 | 135,950 | 1.358 |
| HCOM28(T) | 1.7500 | 3.1250 | 1.562 | 1.250 | 2.110 | 0.044 | 2.625 | 8.0 | 176,370 | 1.948 |
| HCOM32(T) | 2.0000 | 3.5000 | 1.750 | 1.375 | 2.360 | 0.044 | 2.937 | 8.5 | 217,060 | 2.650 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
HCOM16(T) is a heavy-duty HCOM series spherical bearing with a 1.0000" bore (B) and 2.0000" OD (D), used in industrial machinery, agricultural equipment, hydraulic cylinders, and structural pivot applications that require high static load capacity.
HCOM16(T) has a 1.0000" bore (B) and a 2.0000" outer diameter (D).
HCOM16(T) has a body width (W) of 1.000" and an inner race width (T) of 0.781", ball diameter is 1.687", and flat OD (O) is 1.360". Approximate weight is 0.553 lb.
HCOM16(T) is rated at 70,820 lb static radial load with a misalignment angle of ±9.0°.
The ball is 52100 bearing steel with a precision-ground surface and hard chrome plating. The race is alloy steel with an oil-coated finish; the COM series includes a lubrication groove and oil hole for external lubrication.
Adding the 'T' suffix (e.g. HCOM16T) selects the PTFE-lined variant for lower-maintenance, reduced-friction articulation instead of the standard metal-to-metal race. SYZ also offers a chromoly race (FKS series), a stainless steel race (COM-SS series), a zinc-plated race option on request, and a metric equivalent in the COMA-M series.
